|
|
Build Your Online Product Catalogs?
| Product Name: |
MB K11 General Type Waterproof Slurry
|
| Supply Ability: |
500 tons/ month |
| Related proudcts |
chemical material, waterproof slurry, general type, |
| Specifications |
wall,floor |
| Price Term: |
FOB |
| Port of loading: |
Guangzhou |
| Minimum Order |
1 ton |
| Unit Price: |
negotiation |
|
Features:
1. can be used on the wet surface of the basic construction
2. strong bond with the substrate, the active ingredient in the slurry can penetrate the pores and micro-cracks in the cement-based surface, and produce a chemical reaction with the substrate to form a fine crystal integrated waterproof layer
3. can follow up directly after the slurry dry and with no mortar protective layer
4. can be the waterproof both for the positive and back sides.
5. good ventilation and keep the surface dry
6.excellent aging resistance
7. non-toxic, harmless, and environmental-friendly product
Application:
1. the waterproof for indoor and outdoor concrete structure, precast concrete structure, mortar, brick wall and so on
2.hydraulic projects, power stations, factory warehouses, food storehouses, tunnels, kitchens, underground car parks, drainage and walls, floors, swimming pools, water tank and other mortar based layer of waterproof projects
3. can be used as the basic layer for K11 high flexible waterproof slurry
Surface Treatment:
1. the surface should be stable, clean, smooth, no dust, no oil, no shedding, and other ***rital materials
2. the obvious pore and hole must be silted up by the cement mortar, the sharp edges should be wiped out, recommend the cement mortar additive that mixed MB NO.3 slurry
3.if the surface is dry, moist the surface with clean water till there is no clear water before operation
Operation Process:
1. pouring the additives into the container, and then slowly pour the powder and stir them into a uniform powder-free and with no deposit paste
2. using brush or roller brush the slurry on the surface directly, brushing with horizontal and vertical direction in order to avoid leaking anywhere
3.mixed ratio: 25kg powder + 9kg additive
4. during the operation, keep intermittent stir to avoid precipitation
Normal Amount:
for water proofing, the brushing thickness is about 1.2~1.5mm, about 15~20m2/flat
(Note: the above amount is based on flat surface)
Cautions:
1. do other c |
| Company: |
Guangzhou Mebong Architectural Decoration Co., Ltd.
|
| Contact: |
Mr. Joe Yuan |
| Address: |
Room 1205, No. 102, Longkouxi Road, Tianhe District |
| Postcode: |
510630 |
| Tel: |
86-20-87537068 |
| Fax: |
86-20-87537118-2000 |
| E-mail: |
|
|
|
|
Home
